Removing Key Pins

[Gordon Holley]

Joe, do you have a pic that you can scan of your modified dent 
puller, that you could put on the list for us to see?.  I'd be most 
grateful.
Regards, Gordon Holley
On 25 Jul 2003 at 8:39, Joseph Garrett wrote:

> How do you pull them and reliably not enlarge the holes in the wooden rail?
> 
> Terry Farrell
> 
> Terry,
> You use the "handy-dandy" modified Dent Puller. Then size the holes with
> 50-50 Cold Hide glue and water. If you give the "puller" a twist as you are
> pulling the olde pins, they come out cleaner.
> Best Regards,
> Joe Garrett, RPT, (Oregon)
> 
> Been There, Didn't Like It, So I'm Here To Stay! [G}
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives