>David, >Make your own. You can get a machinists dial, (or whatever they are called), >from Harbor Freight, cheap. Something like $6. >A block of aluminum and some steel pin stock, >drill press, hack saw, sandpaper, etc., a couple hours of messing around in >the ole' shop and voila! You'll probably come up with one that far exceeds >the Schaff/Apsco thingees.<G> >Best Regards, >Joe Garrett, RPT, (Oregon) Or a piece of Delignit scrap and a couple of tuning pins. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC