Damper Zing

[Keith Roberts]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Fromm has a 5 or 6 inch pair called "Shogun" that works well. The =
mustache scissors ( 4 inch), didn't fit my fingers. The shogun had  the =
same sharp tip like the mustache trimmer and worked incredibly well, =
even rounding off the inside corners. Don Mannino recommends, "a 4 inch =
pair that costs more than $50", for the Kawai warranty work. The shogun =
from Fromm cost $100.  I think Don was going to get a pair of the Fromm =
because of the finger hole size.
Keith Roberts
  ----- Original Message -----=20
  From: Clark Sprague=20
  To: pianotech@ptg.org=20
  Sent: Thursday, July 03, 2003 6:20 AM
  Subject: Damper Zing


  List,  Anybody out there have a good suggestion for a trimming shears =
or something to trim too long tri-chord double wedge dampers that hang =
too far beyond the bottom of the string level?  Customer complaining of =
too much Zing.

  Clark Sprague

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/40/06/c1/fe/attachment.htm

---------------------- multipart/alternative attachment--