regular tool tools

[Ken Jankura]

I carry a piece of plexiglas about 10-1/2" x 7/8" x 3/16" which doubles as
let-off  gauge (a la Spurlock)  and damper-to-key timing gauge. I wouldn't
do it any other way. It is very fast and very accurate, even when you
needn't be.
Ken Jankura RPT
Fayetteville PA


> >
> > Go to someone who makes those magnetic signs you can put on the side of
> your
> > vehicle. I "think" the magnetic part is 1/16" thick so put two together!
> >
> > Avery
> >
> > At 06:09 PM 01/10/03 -0600, you wrote:
> > >Don't know about your tool kit, but regulating tools brought these
> > >thoughts to mind:
> > >
> > >2. I've thought it would be useful to have a long strip of magnetic
> > >plastic (like refrigerator magnets have) 1/8 inch thick (or whatever)
and
> > >1/2 in wide to place across the strings for setting let-off.
> > >
> > >Alan Barnard
> > >Salem, MO
> >
> >
> > _______________________________________________
> > pianotech list info: https://www.moypiano.com/resources/#archives
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>