I have a PDF file of Bill's keytop jig that he gave me about a year ago. I don't know if it is updated from the Journal articles or not - but maybe. Happy to share if anyone wants it. Terry Farrell ----- Original Message ----- From: "John Pasterczyk" <jp@southbaypiano.com> To: <pianotech@ptg.org> Sent: Wednesday, February 26, 2003 11:42 PM Subject: Re: Keytop replacement > Tommy, > > If you hate filing...The March, May and June '91 > editions of the PTG Journal have articles (including > plans for jigs) by Bill Spurlock for this very > thing...I have just this year built the jigs and must > say I am very pleased with the results after > completing 2 sets (of Keytops) There is minimal > filing involved...just cleanup and edge rounding if > you take to much of the "pre-rounded" edge off. The > bulk of the filing (including notches) is accomplished > using a router...The initial "filing" is done with a > laminate trimming router bit, then using one of the > jigs the keytop is fed through the router in such a > way that the notch comes out square, and exactly where > you want it for every key...after completing 2 sets I > am very pleased with the results. > > John Pasterczyk > Associate Member, PTG > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC