I know of a rosewood Steck upright with no backposts. Just a MASSIVE plate flange all around the case. $50 gets it. Thump --- Phillip Ford <fordpiano@earthlink.net> wrote: > > >I've been at this rewhatevering business since > early in the 1960s. About > >the time I figure I must have seen most everything, > someone like > >Chickering comes along with this: > > > >Yes, that gold stuff between the agraffe line and > the bridges is plate! > >It's all part of a continuous, one-piece casting. > And around the > bellyrail > >the casting extends down probably another 75 mm the > full width of the > >bellyrail........ > >Del > > > > Del, > > Sorry for the slow response on this. A few months > back I saw a Steck grand that had a similar > construction. An integral cast flange on the plate > that was supporting the bellyrail. Seemed a good > idea to me. I don't recall that this additional > structure was as massive as on this Chickering. I > don't think it extended out as far over the > soundboard. I also don't recall how far the flange > extended down onto the bellyrail. I would guess the > piano was about an 1890 vintage. The action was out > so I didn't get to > hear it. It was at a friend's shop in LA. I think > it's still there. I should be down there in 2 or 3 > weeks. I'll try to take some pictures. > > I like the look of this piano; the case shape as > others mentioned, but also the plate casting with > lots of small holes rather than a few large holes. > > Phil F > > > > Phillip Ford > Piano Service & Restoration > 1777 Yosemite Ave - 215 > San Francisco, CA 94124 > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives __________________________________________________ Do you Yahoo!? Yahoo! Shopping - Send Flowers for Valentine's Day http://shopping.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC