Hi Sherry, Mike Swendsen mike.swendsen@shaw.ca icq #709649 can help you. He will make you a tuning lever to your specifications--cheaper than you can buy one. At 12:27 PM 2/18/2003 -0500, you wrote: >Dear list, > I am not happy with my nylon extension tuning lever. It has too >much "give" or "play" for me. I use a simple one piece rosewood lever for >uprights but it doesn't have the clearance for grands. I was looking at the >starhead European lever in the Schaff catalogue and wondered if any of you >had experience with this lever--or could make suggestions for a good "grand" >lever. (I am unable to use the levers with a ball on the end because of >wrist fusion.) Thanks for the help. > > Sherry > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > > Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. mailto:pianotuna@accesscomm.ca http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC