Sizing front rail pin holes

[gordon stelter]

CA? Dunno. Just a thought. Should be O.K. if you are
using PVC-E, supply house or fabric store type.
     Thump

--- Keith Roberts <kpiano@goldrush.com> wrote:
> Well, now that you have nice clean flat surfaces,
> you have to pick the right thickness bushing cloth
> for the hole and pin. If you are unlucky enough not
> to be able to use Spurlocks mortise sizing cauls,
> you can fit them individually or some will be tight
> and require easing.
> Keith R
>   ----- Original Message ----- 
>   From: FIXPIANOS@aol.com 
>   To: pianotech@ptg.org 
>   Sent: Sunday, February 16, 2003 9:51 AM
>   Subject: Sizing front rail pin holes
> 
> 
>   What are some suggestions for sizing loose front
> rail pin holes. I've done the hide glue solution and
> thought there might be a better way.
> 
>   Thanks.
> 
>   Donn Young, RPT 
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com