Sizing front rail pin holes

[Keith Roberts]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Well, now that you have nice clean flat surfaces, you have to pick the =
right thickness bushing cloth for the hole and pin. If you are unlucky =
enough not to be able to use Spurlocks mortise sizing cauls, you can fit =
them individually or some will be tight and require easing.
Keith R
  ----- Original Message -----=20
  From: FIXPIANOS@aol.com=20
  To: pianotech@ptg.org=20
  Sent: Sunday, February 16, 2003 9:51 AM
  Subject: Sizing front rail pin holes


  What are some suggestions for sizing loose front rail pin holes. I've =
done the hide glue solution and thought there might be a better way.

  Thanks.

  Donn Young, RPT=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/1f/07/cc/fe/attachment.htm

---------------------- multipart/alternative attachment--