help with action geometry

[Richard Brekne]

---------------------- multipart/alternative attachment


Wimblees@aol.com wrote:

> I want to replace the blocks. But the question I have is measurements.
> About 20 years ago when I put a new action in a Steinway, and these
> blocks were not attached to the action frame. I think I remember I had
> to sort of go by where the striking point was of the last couple of
> notes, combined with the hieght of the hammers. I had a hell of time
> figuring out where to put them. Is there some measurement I can go by
> to determine where I have to put the blocks, and how high the action
> has to be?
>
> Wim

Not sure of what you mean by "blocks". Do you mean where the top action
screws into the key frame... as in under each bracket ?



--
Richard Brekne
RPT, N.P.T.F.
UiB, Bergen, Norway
mailto:rbrekne@broadpark.no
http://home.broadpark.no/~rbrekne/ricmain.html


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8b/b8/9e/f3/attachment.htm

---------------------- multipart/alternative attachment--