Flange centre can give a similar kind of noise. Darn I was actually wrong. <G> Not the first time by a long chalk. Regards Roger At 08:39 PM 2/8/2003 -0500, you wrote: >AH, HA!!!!!!!! WRONG!!!!!! > >That was the wonderful RJ tip I was referring to. I heard that little guy >jingling away and all the other were quiet. I thought that I had found my >first loose damper lever lead. They didn't seem loose though upon closer >inspection, but I thought maybe its one of those things that will only >manifest themselves when installed. So I used a brass rod to tap a couple >marks on the lead on each side to be sure the leads were tight. Same >noise. No difference. > >But I know I will run into it someday, and I will be thinking of your kind >instruction at that time. > >Terry Farrell > >----- Original Message ----- >From: "Roger Jolly" <roger.j@sasktel.net> >To: "Pianotech" <pianotech@ptg.org> >Sent: Saturday, February 08, 2003 10:54 AM >Subject: Re: Today's Puzzler > > > > > > Ho Terry > > Under lever lead may be loose. > > Remove the underlever and spread the lead a little, or a dab of CA should > > do the trick. > > Don't be surprised is after you fix it, the others sound a little noisy, > > but just not enough to click. > > Another thing to try. > > Regards Roger > > > > > > At 07:55 AM 2/8/2003 -0500, you wrote: > > >I'll try my hand at this game. You guys will likely beat me up pretty > quickly. > > > > > >1940s all original Baldwin "L". Pretty good condition for its age. Piano > > >teacher. Complaint: G#4 makes clicking/clunking noise - perhaps more > noise > > >on release of key, but some on blow. You won't hear it on a soft blow, > but > > >medium and harder will do it. > > > > > >Removed action. G#4 a bit noisy, but they all are. Don't think problem is > > >in action. Find G#4 damper. Flick up from action cavity - > > >"clickity-clunk". Put finger on underlever and one on damper head, push > > >lift mechanism and return - "clunk". Replace damper head with quiet > > >neighbor - "clunk". > > > > > >Nothing hitting sostenuto (is that spelled correctly?) lever. > > > > > >Not too many things left - what is causing noise? I thought I was > going to > > >be thanking Roger Jolly for an excellent tip he posted a while back - but > > >that was not it either! > > > > > >Terry Farrell > > > > > >_______________________________________________ > > >pianotech list info: https://www.moypiano.com/resources/#archives > > > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC