This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Dave Don't the centerpins run through bushing cloth just like any other = action? I don't understand why the plastic has anything to do with the = sluggishness of the centers. Maybe reaming for a little more clearance = might be a better solution. Lubrication may not be the answer to overly = tight fitting pins. Paul Chick ----- Original Message -----=20 From: Piannaman@aol.com=20 To: pianotech@ptg.org=20 Sent: Saturday, February 08, 2003 2:26 AM Subject: More plastic vs. CLP Techs,=20 Winter in central California often means sluggishness in pianos, = because many people choose to leave windows open in the vicinity of = pianos, just to let in a little "fresh" air, which is usually quite = damp.=20 Went out to yet another house where another Kawai upright had a = "sticky key". The hammer flange bushing was once again the culprit. = According to a response or two I got to my last post, the plastic wasn't = the culprit. Since this piano is less than a year old, and the pins = aren't corroded, I once again tried CLP to determine if it would work on = centers in plastic parts. =20 I won't say that it didn't help at all, but the lubricity effect was = minimal, at best. Inadequate would be a better description. Nothing = like what CLP does on wood parts(even in funky old instruments that = would be better off put to sleep). .=20 I anxiously await my shipment of Goose Juice(and summer!).=20 Dave Stahl ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ff/a4/cb/8a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC