help!

[SUSAN P SWEARINGEN]

The piano is a Raymond.  I've never heard of it before but it is a full
upright.  I'm guessing it is at least 75 years old and the action is labeled
"Strauch Brothers - New York."

As I don't weld or even know anyone who does, I'm thinking the JB Weld
solution is the one I might try.

Thanks to everyone so far.

Corte Swearingen
----- Original Message -----
From: "Joseph Garrett" <joegarrett@earthlink.net>
To: <pianotech@ptg.org>
Sent: Thursday, February 06, 2003 3:26 PM
Subject: help!


> It would be nice if we knew what the make and model/size of the piano is.
> <G> I have many upright actions, left over from scrapped pianos. As a lot
of
> turn of the century pianos had brackets made by the same manufacturers, it
> is possible I have what you need, out of my "junk yard". <G>
> Best Regards,
> Joe Garrett, RPT, (Oregon)
>
> Been There, Didn't Like It, So I'm Here To Stay! [G}
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives