This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Try a bit of lube on the threads. Tap from the top and bottom with a = punch. Then try turning by hand a slightly oversize drill from the = bottom. I assume you got the hole all the way through. Might work. A = square tapered easy out might work from the bottom too. Carl Meyer Assoc. PTG Santa Clara, California cmpiano@attbi.com=20 ----- Original Message -----=20 From: Phil Frankenberg=20 To: pianotech=20 Sent: Tuesday, February 04, 2003 8:44 AM Subject: broken agraffe I am struggling with a frozen agraff on a Steinway D. Has anyone tried = heating the stud ,say with a soldering iron? Any suggestions would be = appreciated. When it broke it left a peak across the center making it = extremely difficult to drill down the center for an ez out. I managed a = slightly off center hole but it's not budging. Thanks. Phil Frankenberg Csuc Chico Ca. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/06/77/6b/17/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC