This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment No more than 1/4 turn. But it was one of those passing bits of info that = flew by me during some discussion in the shop. We had covered a bit of = downbearing in the technical at the guild chapter meeting. Dale tried to = subscribe to the list again and got a confirm letter but hasn't received = any posts. Anybody know why? He has aol. Keith R ----- Original Message -----=20 From: David Love=20 To: Pianotech=20 Sent: Tuesday, February 04, 2003 6:52 AM Subject: Turning down the plate screws to increase bearing I've got a S&S B that I believe may be suffering from insufficient = bearing in the capo section. How far can I safely turn down the plates = bell bolt and plate screw in order to flex the plate downward in that = area. David Love davidlovepianos@earthlink.net ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/98/aa/79/42/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC