Carman: But it's much easier and faster to simply heat the end of the wire with a propane torch and push the elbow on the wire. dave *********** REPLY SEPARATOR *********** On 2/2/2003 at 10:54 PM Carman Gentile wrote: >This is probably not an original idea, but I have not seen or heard of >it yet. > > A handy tool to spin new plastic spinet elbows onto the drop sticker >wires is a TUNING FORK. I figured it out in a moment of >desperation. Place a tubular hammershank repair sleeve on the stem of a >"John Walker" blue steel fork and chuck it into a drill-driver. The fork >engages the plastic elbow very well to spin it onto the wire. > > Learn other great techniques at the sunny California State Conference >this month. Visit the link at www.ptg.org/events.php > >Carman Gentile RPT > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives _____________________________ David M. Porritt dporritt@mail.smu.edu Meadows School of the Arts Southern Methodist University Dallas, TX 75275 _____________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC