Elbow spinner

[Carman Gentile]

   This is probably not an original idea, but I have not seen or heard of 
it yet.

    A handy tool to spin new plastic spinet elbows onto the drop sticker 
wires is a TUNING FORK.  I figured it out in a moment of 
desperation.  Place a tubular hammershank repair sleeve on the stem of a 
"John Walker" blue steel fork and chuck it into a drill-driver.  The fork 
engages the plastic elbow very well to spin it onto the wire.

   Learn other great techniques at the sunny California State Conference 
this month.  Visit the link at www.ptg.org/events.php

Carman Gentile RPT