This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Robin, To use the cord, make an eyelet of one end using tight bond. pull = through the holes and eye of the spring in the proper order <G> Sort of = like refelting the flange bushings. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Robin Blankenship=20 To: pianotech@ptg.org=20 Sent: Saturday, April 19, 2003 3:49 PM Subject: Kimball console - Schwander action - butt springs Hi folks, Does anyone have any quick, handy advice for replacing the hammer butt = springs on a Schwander vertical action? That is, how to feed the cord = through the tiny holes.=20 Thanks, Robin Blankenship Southside Piano Service Matoaca, VA --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.471 / Virus Database: 269 - Release Date: 4/10/03 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/98/0a/c5/4b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC