---------------------- multipart/alternative attachment At 02:10 PM 9/29/2002 -0400, you wrote:<snip> >As far as traveling is concerned, you should do that after hanging any >way. The hammers give you a much better guide. > >Wim I travel new shanks before hanging the hammers because if you hang the hammer straight and then have to shim a travelling shank, the hammer is not longer straight. Then you will either have to remove the hammer and reglue or burn-in if slightly off. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e5/21/04/a0/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC