Replacing Hammer Rail Sandpaper

[Erwinspiano@aol.com]

---------------------- multipart/alternative attachment
In a message dated 9/29/2002 6:58:26 AM Pacific Daylight Time, 
jonpage@attbi.com writes:


> Subj:Replacing Hammer Rail Sandpaper 
> Date:9/29/2002 6:58:26 AM Pacific Daylight Time
> From:<A HREF="mailto:jonpage@attbi.com">jonpage@attbi.com</A>
> Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
> To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
> Sent from the Internet 
> 
>              John

                     Thanks
                     Dale

> 
> I've been on the lookout for long sandpaper strips to replace the old paper 
> 
> on the rails rather than piecing
> in strips cut from sheets. While perusing the new Klingspor catalogue I 
> came across these few items.
> 
> Rather than inserting the page link for each item (which takes up three 
> lines each)
> I'll give the product number for a search at their site.
> http://www.woodworkingshop.com
> 
> This one is a Heavyweight paper which is self adhesive, the roll only come 
> in 4 1/2" width. (320 grit selected)
> #    AR20270
> 
> This is a lighter weight paper measuring 2", 320 grit. It is the same as 
> the sheets which I've been
> piecing and lightly gluing onto the rails.
> #    SR00886
> 
> This is a cloth backed abrasive, 3", 320 grit which might be good for 
> Tubular Action Rails.
> I've been piecing in Fine grit Emery Cloth (150 grit) from sheets.
> (A double-sided adhesive tape is applied to the rail first).
> #    SR98760
> 
> All rolls are 10 yards long. Other grits/widths are available.
> 
> Lots of other nifty items as well. Those doing lathe work, check out this 
> tool:
> #    SZ00036
> Regards,
> 
> Jon Page,   piano technician
> Harwich Port, Cape Cod, Mass.
> mailto:jonpage@attbi.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0f/f0/25/0e/attachment.htm

---------------------- multipart/alternative attachment--