This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hmmm. Seems like you'd have to really know the hammers you were = hanging--from experience with the brand and "style." I was talked into = (only way I can say it) A. Isaac upright hammers for a Baldwin 6000. = Those suckers were so soft they sounded like marshmallows on sticks. So = rather than making pincushions out of them, I'd be more inclined to pour = on the lacquer before a put in another set of those. But, having only = used them once and having only installed new hammers 4 times, I wouldn't = dare do anything until I'd had them in the piano to evaluate. Am I = on-track here, or missing vital information? Alan Barnard ----- Original Message -----=20 From: jolly roger=20 To: Pianotech=20 Sent: Wednesday, September 18, 2002 8:07 PM Subject: Re: Voicing Heck, I needle and gang file them on the bench before I hang them, = thought every body did that way. <G> Yamaha hammers about 7 or 8 shots = per shoulder deep, with 3 needles. And that is just getting started. = Once hung, lots more deep needling to open up the tone. The less I have = to do at the crown the better I like it. Roger Roger At 07:14 PM 9/18/02 -0400, you wrote: Standard pre-voicing needle work. Hammers hung, needled in this = fashion. Jon Page ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/7b/b8/92/88/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC