Pinblock too low/Router

[Joseph Garrett]

All,
There are certain "laminate trimmers", (routers), that will fit in the
action cavity. I had to route a 1/2" groove for an Acme Threaded Rod, on a
grand, a while back. My little Rockwell Laminate trimmer worked just fine
for the job. Because these routers are a lower amperage, you need to go slow
and not bog it down, when doing a hard wood like Maple or Beech. Otherwise
you will burn out the unit. DAMHIK<G>
Best Regards,
Joe Garrett, RPT, (Oregon)

Been There, Didn't Like It, So I'm Here To Stay! [G}