At 02:43 PM 9/5/2002 +1000, you wrote: >I'm trying to get an upright ready in a hurry for a cheap temporary >rental. The balance rail holes are ugly. Lots of missing wood. Some >keys are really loose. Center punching around the hole? What size, >shape tip? How close to the hole? How deep? Then glue size? >I heard also of making a kerf cut and installing piece of veneer. >Front and back? I think I could make a cut with my drywall knife that >would be wide enough for the veneer edging I have. Would I then just >size the hole or drill it out? >Thanks >Keith R Schaff Catalogue, pg. 64 #'s 258, 259 Fiber washer inserts with recess cutting tool. Under $20. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC