In a message dated 09/03/2002 7:00:46 AM Pacific Daylight Time, Richard.Brekne@grieg.uib.no writes: > when I put a little sideways pressure on the end that is > screwed into the tenor/treble strutt, the buzz abruptly > dissapeared. Knocking on this bar on the side yeilds a > rattling / buzz noise and it is clear this is not dead on > solid at all points to the plate...... > [snip] > I would very much appreciate any good advice you have Richard, I'd refer it right back to Steinway. It is a warranty issue; pass on your findings and let them fix it. Last I heard, it is not officially sanctioned to remove this bar, but it happens all the time, even at Steinway. I think it is more important for coupling than strength, except maybe while the piano is being moved. Why take any risk at all, or expense? Bob
This PTG archive page provided courtesy of Moy Piano Service, LLC