This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment -----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org] On Behalf Of jphouweling Sent: Monday, September 02, 2002 11:07 AM To: pianotech@ptg.org Subject: Re: grand piano in storage I once heard that the hammers go out of alignment due to the side weight . Possible ,along with bichords and trichord damper felt getting somewhat distorted .In a previous thread I believe someone mentioned checking position of the damper guide rails after extended "side" time , but all these conditions ,especially hammer spacing would fall under regular maintenance in order to put the piano back in service. Tom Driscoll ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/31/1b/95/d6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC