Hey Roger, I hope one of them was not in Norway. Can't count the number of dumb things I have said or done on both hands and feet but try mixing up the rods on a spinet that are exactly the same length then not testing wether they are in the correct hole. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Roger Jolly" <roger.j@sasktel.net> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, November 25, 2002 10:03 AM Subject: Re: Stupid Mistake > > >Corte... I am the world's best at snapping off hammers #1 and #88 on Grand > >actions...... > >and I don't even need to drop a top on them!! :-) > >Jim Bryant (FL) > > Hi Jim, > I bet I would be close behind you, but I solved my > problem. I have two 3/8" dowels with a hole bored in them to slip over the > FR pin. This prevents the end keys from going down, when sliding the action > in and out. > Old brain like mine used to keep forgetting. Now for the funny!! Twice I > have left the dowels in position and had to go back and retrieve them. > Oh well, the best made schemes of Mice and Men. > > Roger > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC