Hi Joe, I would appreciate a copy. Thanks Paul Tizzard Cape Town South Africa ptizzard@mweb.co.za ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <pianotech@ptg.org> Sent: Wednesday, November 13, 2002 12:54 AM Subject: Replacing hammers on kimball verical > Come on guys/gals, there should be absolutely no reason to "send samples" to > a hammer manufacturer, to get the proper replacements made!!!! A month or > so, I offered my "hammer replacement sheet" to all. A few responded and now > can order hammers with, simply, a piece of paper. The offer still stands. > Get the sheet and thereby not putting the piano out of commission for a > length of time while the "Samples" are floating about in the Snail Mail > abyss! > Regards, > Joe Garrett, RPT, (Oregon) > > Been There, Didn't Like It, So I'm Here To Stay! [G} > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC