18 mm roller dimension - grand shanks

[Farrell]

If ya can't find 'em, make a little jig and cut a slot at the desired distance for the knuckles/rollers.

Terry Farrell
  
----- Original Message ----- 
From: "Isaac OLEG" <oleg-i@wanadoo.fr>
To: "Pianotech Mailing list" <pianotech@ptg.org>
Sent: Tuesday, November 12, 2002 3:59 PM
Subject: 18 mm roller dimension - grand shanks


> 
> Do someone knows if a 18 mm dimension (roller to center pin) can be
> find on replacement shanks and where , if exist.
> 
> Not for me, a colleague asked me about that, so I thought of asking
> you.
> 
> Thanks, and bests
> 
> Isaac OLEG
> 
> Isaac OLEG
> 
> PianoTech
> 19 rue Jules Ferry
> 94400 VITRY sur SEINE
> FRANCE
> tel. : 033 01 47 18 06 98
> fax : 033 01 47 18 06 90
> cell: 06 60 42 58 77
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives