I was thinking in regards to a line from the tuning pin to the hitch pin, not bridge height. Regards, Jon page At 10:02 PM 11/6/2002 +0100, you wrote: >I tried , but mine is too high, it could be used to see how the >soundboard is curved in regard of the bridge. > >Beside, it is very useful for alignments, drilling , leveling ... > >Isaac OLEG > > > -----Message d'origine----- > > De : pianotech-bounces@ptg.org > > [mailto:pianotech-bounces@ptg.org]De la > > part de Jon Page > > Envoye : mercredi 6 novembre 2002 14:14 > > A : pianotech@ptg.org > > Objet : Laser > > > > > > Looking through the latest Deluth Trading Co catalogue, I saw an > > interesting item, > > a Laser Torpedo Level (# 75770) with Beam Spreader (# 75773) > > > > http://www.duluthtrading.com/cgi-bin/sgrp0130.exe?T1=75772&S >KW=3DTC2&UID=2002110607050485&GEN0=&GEN1= > >I wonder if the laser combined with the beam spreader would facilitate >string alignment and bridge layout. > >More tools...Arh, Arh, Arh >Regards, > >Jon Page, piano technician >Harwich Port, Cape Cod, Mass. >mailto:jonpage@attbi.com >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC