Drop too low mean a bump of the jack in the roller = fast worn roller, and inefficient stroke / tone. + springs too heavy Isaac OLEG > -----Message d'origine----- > De : pianotech-bounces@ptg.org > [mailto:pianotech-bounces@ptg.org]De la > part de Bradley M. Snook > Envoyé : mardi 5 novembre 2002 05:26 > À : Pianotech > Objet : Re: Drop > > > Ed, thank you for such a detailed response; it was so good > that I printed it > out for my further reference. I think that I am starting to > get a much > better understanding of the properties surrounding the drop screw > adjustment, but now I need to try a few things out on all 88 keys. > > However, the few things that I did try out today seemed > provide some amazing > insight. I think that I may have been approaching drop > regulation from the > wrong standpoint. One of the main things that I noticed was > that adjusting > the drop controlled the duration of the key under resistance of the > repetition spring: a lower drop is under this tension for a > longer duration. > The good part of this, especially with tighter repetition > springs, is that > the spring can start the return of the key at a much > quicker pace, allowing > the key return to keep up more quickly with the pianists > fingers and convey > a more connected feeling in the keys. > > Bradley M. Snook > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC