Knee Board Fabrication

[Farrell]

Go to any good lumber supply and they will either have or can order 5' wide sheets of plywood.

Or just make rectangular frames out of 1x2 and cover with speaker grill cloth (or any suitable fabric).

Terry Farrell
  
----- Original Message ----- 
From: "Philip Jamison" <mortier@netreach.net>
To: <pianotech@ptg.org>
Sent: Sunday, November 03, 2002 2:13 PM
Subject: Knee Board Fabrication


> I'm working on some studio pianos with missing knee boards. There are 7, all
> mahogany Sohmer studios. They measure 18 3/4" X  52", so I'd get only one
> per 4X8 sheet of plywood. Any suggestions?
> 
> Philip Jamison
> West Chester, PA
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives