It's not as clear as I would have liked in these low-resolution photos, but the backscale length at A-1 went from approximately 25 mm (most of which is made up of twisted--i.e., approximately doubled--0.065" steel rod) to 75 mm with the looped string pivoting at the vertical hitch. What do you supposed happened to the tone in the low bass? Del ----- Original Message ----- From: "Delwin D Fandrich" <pianobuilders@olynet.com> To: "Pianotech" <pianotech@ptg.org> Sent: November 02, 2002 11:58 AM Subject: Re: Better Bass Scale for M&H A > > With vertical hitches the German loop is neither necessary nor beneficial. > (See the attached photographs of the M&H A under discussion.) > > But you are certainly correct that they would be an advantage using standard > hitches. > > Del > ---------------------------------------------------------------------------- ---- > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC