In a message dated 10/31/02 9:03:41 PM, imatunr@srvinet.com writes: << You have to move the piano out from the wall and use a rather large allen wrench to remove two bolts that hold the lid from moving back so that it can be removed. >> My screwdriver tip is exactly the right width to fit in that cavity. It fits from one point of the hexagon (pentagon, whatever) to it's neighbor on the opposite side. It's from Schaff (combination handle screwdriver tip) so some of you may also find that this works. I found out through necessity, having driven some 30 miles to get to a church tuning only to find the lid bolted down. Tom Sivak
This PTG archive page provided courtesy of Moy Piano Service, LLC