Hi Dave, WHOOPS. Disregard previous post. Must be old age or young wife, getting words mixed up. Joe's time is spot on if you are just changing the cords. At times (when I have run out of new flanges) Tighten flanges first. I remove the tapes and the hammers (leaving the flanges in place) put the action down on the dampers (blocks under the brackets) lock the action down (clamps) strip the old cord out and replace with new cord. Refit hammers and dampers and hey presto, 4.5 to 5 hrs. Tony Caught Darwin Australia caute@optusnet.com.au ----- Original Message ----- From: "Tony Caught" <caute@optusnet.com.au> To: <pianotech@ptg.org> Sent: Thursday, May 16, 2002 9:45 PM Subject: Re: Yamaha Upright hammer flanges > Hi Dave, > > Joe's time is spot on if you are just changing the cords. At times (when I > have run out of new flanges) Tighten flanges first. I remove the dampers and > the hammers (leaving the flanges in place) put the action down on the checks > (blocks under the brackets) lock the action down (clamps) strip the ole cord > out and replace with new cord. > Refit hammers and dampers and hey presto, 4.5 to 5 hrs. > > Regards > > Tony Caught > Darwin > Australia > caute@optusnet.com.au > > > > > > > > List, > > > > I am about to make a bid on a job to replace all the hammer flanges in a > > Yamaha P-22 studio upright(the threads are breaking at a prodigious rate, > as > > per a previous post...). My "G" works labor guide suggests that this > might > > take me 5 hours. Has anybody done this? I think that Joe's estimate is > > reasonable, giving a bit less than 4 minutes per flange, but I wonder if > > anybody out there has done this job before? > > > > Thanks for any input! > > > > Dave Stahl > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.361 / Virus Database: 199 - Release Date: 07/05/02 > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.361 / Virus Database: 199 - Release Date: 07/05/02
This PTG archive page provided courtesy of Moy Piano Service, LLC