At 10:23 AM 5/16/02 +0000, you wrote: >Hi Jon, > I used to do it that way. Using the new method, makes sure >the loop and flange screw dimention is exact, Therefore the same tension >is on the spring on each note if the spring tips are all in a nice straight >line. Using the scribed line on the flange, as a guide, never worked quite >as accurate for me,I know I like to be anal at times. > >Regards Roger PS. Using hot hide glue, I find the job is a lot quicker. Blunt a utility knife blade, about 1" along the end, to push the cord down into the flange slot. The back end of the blade is still sharp to trim the end of the cord. Roger Roger Jolly Balwin Yamaha Piano Centres. Saskatoon/Regina. Canada.
This PTG archive page provided courtesy of Moy Piano Service, LLC