>Hi Greg, > Most times on a vertical, you can punch them >straight thro' with a nail that has had the tip ground off. Use >medium CA glue to fill the hole, and drill the correct sized hole >for the new wire. >Roger Roger, Greg, List, A simpler act, though maybe not considered the most professional approach, is to drill a new correct size hole right next to the broken stub, insert a new wire and adjust as necessary. It works just fine. Keith McGavern Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild USA http://www.highpointpiano.com/ptg/conv/chicago2002/
This PTG archive page provided courtesy of Moy Piano Service, LLC