Hi Ric, No short cuts that I know off. But a tip. Adjust the pedal dowel so the dampers are just starting to lift, before starting. Then re timing the dampers is a snap. Rotflmao. A sharp pair of surgical cissors is essential for this task. Roger At 06:22 PM 5/14/02 +0200, you wrote: >Hi folks... as long as we are on about dampers... > >I had to trim a set of dampers on a Hamburg C today, and thought I might >get some input on how different techs go about this. I took each of the >wedges out one at a time and trimmed along the string marks, then >polished the wires and reinstalled. I've seen techs trim with dampers in >the piano on a few occasions, but the back half of the damper cant be >done this way... or what ? > >-- >Richard Brekne >RPT, N.P.T.F. >Bergen, Norway >mailto:rbrekne@broadpark.no >http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC