Pin Blocks and OS pins

[Carl Meyer]

Now, that is just tooooo clever.  I'm impressed!  You obviously aren't as dumb as you look.  Of course, I've never seen you.  Thanks for that idea.  Now I'm faced with thinking of an even more clever solution.  Damm!!  I'll work on it.

Carl Meyer  Assoc. PTG
Santa Clara, California
cmpiano@attbi.com 


----- Original Message ----- 
From: <A440A@AOL.COM>
To: <pianotech@ptg.org>
Sent: Sunday, May 12, 2002 12:14 PM
> 
> Greetings, 
>    A more consistant result can be had when using a bit as a reamer if the 
> cutting edges are removed from the bit's tip as well as dulling the first 
> inch or so of the flutes. This allows the bit to center itself in the hole 
> before cutting commences, make for a much more consistant sizing. 
> Regards, 
> Ed Foote RPT 
>