Hello, I said in a last post that parts where available in Europe. It surprises me a bit because Yamaha decisions are took for the whole world generally. I checked that today, and indeed, Yamaha policy is the same here, no parts sold for the piano numbers corresponding at Japan production for Japan. I wonder if it is only for the verticals where the numbers are very recognizable, as all grand's are build in Japan I believe. I remember reading that the first letter of the number is an indication on where the piano was assembled. May be they don't check farther when you order parts. I am working actually on a very good UX (vertical 1.31 m) and, it is a very heavily build piano, the screws are a little loose but not that much , I don't see any sign of future looseness on this one. If I where to order hammers for it , I would ask for U3 hammers - after checking the size on the piano , and look for a number to order the parts. Anyway, as I told before, I have no problems to order parts as damper felt, cushions and punching, key cover, etc... Hope it clears a bit the situation. Isaac
This PTG archive page provided courtesy of Moy Piano Service, LLC