Sand Blasters - Should be "Bead" Blasters!

[Farrell]

Thank you STAN!

Terry Farrell
  
----- Original Message ----- 
From: "Stan Kroeker" <stan@pianoexperts.mb.ca>
To: <pianotech@ptg.org>
Sent: Monday, May 06, 2002 11:56 AM
Subject: Re: Sand Blasters - Should be "Bead" Blasters!


> Terry,
> 
> See January, February and March 1992 PTJ.  Also, these articles are in
> the reprint book titled, General Repair.  I built this blasting cabinet
> and use the glass bead abrasive for cleaning keysticks and complete
> actions.  If you are careful to shake/blow out the action after
> blasting, residual beads are not a problem.
> 
> Stan Kroeker
> Registered Piano Technician
> 
> Farrell wrote:
> > 
> > Hi Joe. I have the Journal CDs and the CDs of the reprints, but I have never been able to do much of a search on them. Bill Spurlock as the author helps big time - any recollection about when the article may have appeared? Thanks.
> > 
> > Terry Farrell