I'd like to see a picture of it! Greg T ----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: <pianotech@ptg.org> Sent: Saturday, May 04, 2002 8:56 AM Subject: Overhead Drill Press: Second Generation > I have completed upgrades to my little-bit-wobbley first generation overhead drill press and produce a very stable second generation version. I replaced a drawer slide with a steel track and four wheels, and I replaced a fishing boat seat swivel with a 3,500 lb-rated trailer spindle and hub. Pretty darn stiff and stable now. > > Specs follow: > X travel = 10 feet > Y travel = 2 feet > Rotation (in the X Y plane) = 360 degrees > Tilt = 25 degrees forward to 10 degrees back (can be reversed by simply rotating drill head) > > Pics available for the new toy of the week! > > Terry Farrell >
This PTG archive page provided courtesy of Moy Piano Service, LLC