Grizzly has a number of options http://www.grizzly.com/products/item.cfm?Product_ID=14889&&User_ID=1080072&St=6105&St2=-61251485&St3=90533954&DS_ID=1 Mike ----- Original Message ----- From: "Robert Goodale" <rrg@unlv.edu> To: <pianotech@ptg.org> Sent: Thursday, May 02, 2002 5:21 PM Subject: Re: Large disk sander > I was looking at a large stationary sander recently made by Jet. It is > a full sized unit with a combination disk and 6" belt. It was around > $500.00. A little over your budget but not by much and you get a belt too. > > Rob Goodale, RPT > Las Vegas, NV > > > Isaac OLEG SIMANOT wrote: > > >Hello, > > > >I am lurking trying to find a large disk sander mounted on a table. > > > >With a $400 budget, is it enough ? > > > >For hammer thinning, what speed and grain will you consider ? > > > >Thanks > > > >Isaac OLEG > > > >PianoTech > >19 rue Jules Ferry > >94400 VITRY sur SEINE > >FRANCE > >tel : 033 01 47 18 06 98 > >fax : 033 01 47 18 06 90 > >cell: 06 60 42 58 77 > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC