Just to satisfy my curiousity Clyde.... were the bushing treated with graphite ? RicB Clyde Hollinger wrote: > Friends, > > Earlier this week I received a complaint that a key was sticking on a > 1976 Yamaha G2 grand piano. When I arrived I diagnosed the problem as > the D#4 damper not returning to rest on the strings after the note was > played. I replaced the center pin holding the damper lever to the > damper lever wire flange and all was fine. The same thing had happened > to the neighboring D4 damper three years ago. > > The removed pin looked discolored where it rotated in the felt bushing, > so I decided to check it out under a microscope and see if I could learn > something. Some friends have a cheap one, but it served to show me that > the center pin appeared to be deeply scratched around the pin. > > Now to my questions: Is this a case of flaking plating that I heard > about? If not, what is likely the problem? Are the center pins I buy > from Schaff plated as well? Will this become a chronic problem for this > particular piano? If so, is there any preventive measure I can take > without replacing that center pin in every damper? > > Thanks, > Clyde Hollinger, RPT -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC