I had the misfortune to tune a Bush & Lane upright piano yesterday. Never have I have such a difficult time tuning a piano, but not for the usual reasons. The plate construction of this piano was such that it was next to impossible to mute the strings in the top 3 octaves: there was about 1/2" clearance between the top of the hammers and a big old plate strut. Two mutes were impossible; I was lucky to get one stuck in there. So I had to tune one string with a second string ringing, hoping to get close, then tune the second string and see where I was. The people who made that piano must hate piano tuners. Tom Sivak
This PTG archive page provided courtesy of Moy Piano Service, LLC