Overpull

[SUSAN P SWEARINGEN]

Actually, with the new Verituner software upgrade, you can put in whatever
default percentages you want and then easily select between them as you move
from the bass to the tenor to the treble.

It's really quite a spectacular instrument.

----- Original Message -----
From: "Joe And Penny Goss" <imatunr@srvinet.com>
To: <pianotech@ptg.org>
Sent: Friday, March 29, 2002 10:26 AM
Subject: Re: Overpull


> Hi Pat,
>  I think those numbers are 10% bass 30% tenor and 36% treble. And tune one
> string with the tuner then match the other two to the tuned string. Do not
> tune all strings with the tuner as the result will be sharp or
over-pulled.
>
> Joe Goss
> imatunr@srvinet.com
> www.mothergoosetools.com
> ----- Original Message -----
> From: "J Patrick Draine" <draine@attbi.com>
> To: <pianotech@ptg.org>
> Cc: "J Patrick Draine" <draine@attbi.com>
> Sent: Friday, March 29, 2002 9:41 AM
> Subject: Re: Overpull
>
>
> >
> > On Friday, March 29, 2002, at 08:44 AM, Robert Scott wrote:
> >
> > >
> > >
> > > Perhaps Dave would like to enlighten us on how the VT forms its
> > > average in pitch raise mode?
> > >
> > >
> > I don't think Dave's on the list, but my experience is that one selects
> > the amount of overpull one wishes (3 default settings: 10% for bass, 20%
> > for tenor/treble, 30% for high treble), and the VT calculates the target
> > for each note played, based on the % selected, and an actual measure of
> > the note's deviation (eg flatness). The user can customize the overpull
> > settings if they wish.
> >
> > Patrick Draine
> >
> >
>