"On spinet pianos (or any really) that sound like a tin can,I have lightly scuffed up the hammer felt (on the final pass),and the piano tone, and tuning, sound a million times better...." Gee, I'm not sure that would help on many of the pianos I see. If you rough up the outer portion (string side) of the hammer felt, doesn't that interfere with the ability of the strings to get down to the bottom of the grooves? ;-) Terry Farrell ----- Original Message ----- From: <HazenBannister@cs.com> To: <pianotech@ptg.org> Sent: Thursday, March 28, 2002 12:05 AM Subject: Was Re: answer to mystery noise > In a message dated 03/27/2002 11:46:18 PM Eastern Standard Time, > Wimblees@AOL.COM writes: > > > > I am not sure what I did to the knuckles when I filed them. But when I did, > > it stopped the noise all together. I guess it took enough roughness, and > > maybe a little corrosion, off the leather, to stop the squeak. > > > > > > Wim,list, > This made me think of filing hammers.On spinet pianos (or any really) that > sound like a tin can,I have lightly scuffed up the hammer felt (on the final > pass),and the piano tone, and tuning, sound a million times better,as some of > the unwanted overtones are quieted down.Also it's easier to get really clean > unisons,listening quietly.Unfortunately,it's a temporary thing,but the > customers really like it.It's good to ask first,but you can usally tell who > would want the brassy sound or not by talking to them. > A friend of mine turned me on to a product called dragon skin,which workes > great for this, also great for reshaping hammers. > Hazen Bannister >
This PTG archive page provided courtesy of Moy Piano Service, LLC