Paul - I've used a hot glue gun to fix this problem. A clamp holds the felt to the molding for a few seconds. There has been no problem with them coming loose and, as far as I can tell, no degradation of tone. Dan Hallett > Paul Plumb wrote: > > I have been asked to reglue hammerheads that have come loose from the > molding (not the shanks) because of heat in a fire. I would like to > know the best kind of glue to use if not hide glue and best way to > clamp them. Any other information that may be helpful would be > appreciated. The piano is about 30 years old and there does not > appear to be any other problems except rust formation on the pins and > strings. I realize that some of the other hammers may become loose in > the future and have warned the client. > > Thanks, > > Paul Plumb > Plumb Pianos ******************************
This PTG archive page provided courtesy of Moy Piano Service, LLC