ebonized finish-touch-up

[jolly roger]

---------------------- multipart/alternative attachment
Hi wayne,
                    The light surface marks can be rubbed out with 0000 steel
wool, ( gently does it) if it has indented the finish then you need a
professional refinisher to do a good job. remember to rub with the grain of
the
previous rubbing.
Regards Roger

At 07:02 AM 3/16/02 -0500, you wrote:
>hi there
>
>what could i do to touch up the ebonized finish on a stienway lid. it is
>not scratched .  but there are two lines that have been rubbed onto the
>lid.
>any suggestions.
>
>wayne
> 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/30/41/77/23/attachment.htm

---------------------- multipart/alternative attachment--