---------------------- multipart/alternative attachment To those of you that have done the YC expanding bracket replacement: Doing my first one, and have a question. The center brackets I received are shaped and angled differently than the originals. Installed them and set the action spread as directed. Seem to fit onto the rails okay, but there's about at least a 1/8" gap between the bottom of the brackets and the keyframe. The instructions say that the brackets should fit the keyframe without warping it, but makes no mention of what to do about it. Have any of you had to shim or replace the blocks that the center brackets rest on? Thanks (again), Mary Bailey p.s. - and my entry to DYE awards: making the world's most perfect splice in a bass string only to discover that you forgot to run the string through the agraffe first. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/39/98/ba/0b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC