decals

[jolly roger]

---------------------- multipart/alternative attachment
Hi Marcel,
                  The big Heintzman decals were always a hassle for me,
especially the plate decal. A secret I learned.
Follow the instructions, with one small difference. After using the Decal glue
and getting the decal on with no air bubbles under it.   Leave it alone for a
few hours to dry and adhere before wetting the backing paper, and it will just
slide off without the decal moving with the paper. 
These decals are a fraction of the price of the decals unlimited,In the
case of
heintman with 3 large dedcals, you save about $100 Cnd.
Regards Roger.





At 10:30 PM 3/1/02 -0500, you wrote:
>Hi,
>
>Is there a foolproof way to install soundboard and fallboard decals. I had 2
>to install today, and, as usual, I needed 4 of them to make a "relatively"
>decent one... I used the glue that Pianophile supplied with the decals and
>tried to follow the instructions. The letters curled up and teared on the
>first two. Is it because I'm not waiting long enough? How do you guys do it?
>Do you use laquer? varnish? or schellac?
>
>Please, give me some pointers so I can avoid the decal blues next time.
>
>Thanks in advance,
>
>Marcel Carey, RPT
>Sherbrooke, QC
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.311 / Virus Database: 172 - Release Date: 01-12-27
> 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/af/4a/cd/a1/attachment.htm

---------------------- multipart/alternative attachment--